Hidden Dog Fence & Remote Training Collar in 1 System

General Information

LED display provides easy visibility for selecting shock levels, vibration, warning beep, and seeing dog ID with battery level
Train up to two dogs from the same Remote Trainer
- Dog selection button allow you to select dog
Extended range up to 2,000 meters in open areas
99 levels of momentary & continuous shock stimulation
- Rotate Buttons allow you to set your shock level and lock suitable shock level
- 99 levels of shock stimulation
- 1 level of vibration stimulation
- One tone
Highlight LED function can find pet from 200~300 meters away at night

Components

Fence transmitter

Boundary Width Control Switch:
- This knob allows you to adjust the Boundary Width, which is the combination of Warning Zone and Static Correction Zone.
Boundary Wire Terminals:
- These terminals are where the Boundary Wire connect to the Fence Transmitter in order to form a continuous loop, designating the pet area.
Power Light:
- This light indicates if the system is on or off. If the light is glowing, the system is on and functioning.
Loop Indicator Light:
- This light indicates whether or not the Boundary Wire is forming a complete loop enabling the signal to be transmitted.
- If the light is glowing, a continuous loop has been formed.
Power Jack:
- This is the connection point for your Power Adaptor. The Transmitter is powered by 18V DC Power.
Power button:
- Power on or off the Fence transmitter

Remote Control

$C:\Users\40412\Desktop\066.png066$

Shock Adjust & Lock Switch:
1. Rotate the switch to adjust the shock intensity from levels 0 to 99.
2. Press the switch to lock the shock level , press the switch again to unlock the shock level
Vibration button:
- Vibration stimulation. Press 1 time - vibrate 1 time. Press and hold on- emit continuous vibration. Will stop vibrating when you let go of the button. Will stop automatically when you go past 8 seconds of holding the button.
Dog selection button:
- Move up to choose the first dog , The LED screen display “1”; Move down to choose the second dog, the LED screen display “2”
Beep button: No-stimulation warning beep
Led light: Indicates the working status and low battery
Highlight Led buttons:
- Press button one time , the receive collar will highlight flash 1 time per 3 seconds continuously;
- Press button twice, The highlight LED is on
- Press button three times, the highlight LED is off
Momentary shock button: Momentary static shock.
Continuous shock button: Continuous static shock for about 8 seconds.
LED display
- Display the shock ,warning beep or vibration mode ; display shock level , lock or unlock shock level ,dog ID ,battery Level
On/Off button: This is the power switch;
- hold this button for 1 seconds to switch on power, then LED display is on.
- You may change Dog ID by move the Dog Selection Button.
- If you want to switch off the power, hold this button for 1 seconds to switch off power.
DC Jack: Charging the transmitter

NOTE: The red LED light will flash when the battery is low on power. Recharge the battery at once.

The transmitter has the memory functions to save the suitable shock for different dogs.

Features

Correction Zoning

8 seconds safety termination. Your pet’s Receiver Collar will automatically cease static correction when your pet gets stuck in the correction zone for more than 8 seconds.
Audible wire-break alarm to ensure you system is never down ????
Warning vibration and static correction for pet boundary awareness training.
Ability to set pet pass through areas for your pet to pass through without any static corrections.

How to set up

One vibration and One tone

“Buzz” sound activated with a separate button.

Waterproof receiver and remote trainer.

Rechargeable 3.7V Li-ion battery for Receiver Collar and Remote Trainer.

LED low power indicator that flashes red when battery is low.

Fully functional multi-dog training system.

What's In The Box

Hidden Dog Fence & Remote Training Collar in 1 SystemUpdated 2 years ago